Chapter 2
Using ROS
RUGGEDCOM ROS
User Guide
34 Using the Console Interface
Figure6:Elements of a Typical Screen (Example)
1.Title 2.Parameters and/or Data 3.Access Level or Alarm Notification 4.Controls
NOTE
If desired, the web interface can be disabled. For more information, refer to Section4.5, “Enabling/
Disabling the Web Interface” .
Section2.5
Using the Console Interface
The Console interface is a Graphical User Interface (GUI) organized as a series of menus. It is primarily accessible
through a serial console connection, but can also be accessed through IP services, such as a Telnet, RSH (Remote
Shell), SSH (Secure Shell) session, or SSH remote command execution.
NOTE
IP services can be restricted to control access to the device. For more information, refer to Section3.9,
“Configuring IP Services” .
Each screen consists of a system identifier, the name of the current menu, and a command bar. Alarms are also
indicated on each screen in the upper right corner.
To Next Page
Loading...
Need help?
General
