Chapter 2
Using ROS
RUGGEDCOM ROS
User Guide
32 Logging Out
NOTE
The following default usernames and passwords are set on the device for each user type:
Guest
Username: guest
Password: guest
Operator
Username: operator
Password: operator
Admin
Username: admin
Password: admin
CAUTION!
To prevent unauthorized access to the device, make sure to change the default guest, operator,
and admin passwords before commissioning the device.
For more information about changing passwords, refer to Section4.3, “Configuring Passwords” .
2. In the User Name field, type the username for an account setup on the device.
3. In the Password field, typ the password for the account.
4. Click Enter or click Submit (Web interface only).
Section2.3
Logging Out
To log out of the device, navigate to the main screen and do the following:
• To log out of the Console or secure shell interfaces, press CTRL + X.
• To log out of the Web interface, click Logout.
Figure4:Web Interface (Example)
1.Logout
NOTE
If any pending configuration changes have not been committed, RUGGEDCOM ROS will request
confirmation before discarding the changes and logging out of the device.
To Next Page
Loading...
Need help?
General
