EasyManua.ls Logo

Siemens RUGGEDCOM ROS v4.3 - Section 3.6.4, Viewing Statistics for Specific Ethernet Ports

Siemens RUGGEDCOM ROS v4.3
266 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
RUGGEDCOM ROS
User Guide
Chapter 3
Device Management
Viewing Statistics for Specific Ethernet Ports 69
Figure23:Ethernet Port Statistics Table
This table displays the following information:
Parameter Description
Port Synopsis:  1 to maximum port number
The port number as seen on the front plate silkscreen of the switch.
InOctets Synopsis:  0 to 18446744073709551615
The number of octets in received good packets (Unicast+Multicast
+Broadcast) and dropped packets.
OutOctets Synopsis:  0 to 18446744073709551615
The number of octets in transmitted good packets.
InPkts Synopsis:  0 to 18446744073709551615
The number of received good packets (Unicast+Multicast+Broadcast)
and dropped packets.
OutPkts Synopsis:  0 to 18446744073709551615
The number of transmitted good packets.
TotalInOctets Synopsis:  0 to 18446744073709551615
The total number of octets of all received packets. This includes data
octets of rejected and local packets which are not forwarded to the
switching core for transmission. It should reflect all the data octets
received on the line.
TotalInPkts Synopsis:  0 to 18446744073709551615
The number of received packets. This includes rejected, dropped
local, and packets which are not forwarded to the switching core for
transmission. It should reflect all packets received ont the line.
InBroadcasts Synopsis:  0 to 18446744073709551615
The number of good Broadcast packets received.
InMulticasts Synopsis:  0 to 18446744073709551615
The number of good Multicast packets received.
CRCAlignErrors Synopsis:  0 to 4294967295
The number of packets received which meet all the following
conditions:

Table of Contents

Related product manuals