Siemens RUGGEDCOM ROS v4.3 User Manual

Chapter 1
Introduction
RUGGEDCOM ROS
User Guide
12 SNMP Management Interface Base (MIB) Support
Services Port Number
Service Enabled/
Disabled
Access Authorized Note
come to CPU,
dropped if service
not configured
RCDP — Disabled
(configurable)
Yes
Section1.6
SNMP Management Interface Base (MIB) Support
RUGGEDCOM ROS supports a variety of standard MIBs, proprietary RUGGEDCOM MIBs and Agent Capabilities MIBs,
all for SNMP (Simple Network Management Protocol).
CONTENTS
• Section1.6.1, “Supported Standard MIBs”
• Section1.6.2, “Supported Proprietary RUGGEDCOM MIBs”
• Section1.6.3, “Supported Agent Capabilities”
Section1.6.1
Supported Standard MIBs
RUGGEDCOM ROS supports the following standard MIBs:
Standard MIB Name Title
RFC 2578 SNMPv2-SMI Structure of Management Information Version 2
RFC 2579 SNMPv2-TC Textual Convention s for SMIv2
SNMPv2-CONF Conformance Statements for SMIv2RFC 2580
IANAifType Enumerated Values of the ifType Object Defined ifTable defined in IF-
MIB
RFC 1907 SNMPv2-MIB Management Information Base for SNMPv2
RFC 2011 IP-MIB SNMPv2 Management Information Base for Internet Protocol using
SMIv2
RFC 2012 TCP-MIB SNMPv2 Management Information Base for the Transmission Control
Protocol using SMIv2
RFC 2013 UDP-MIB Management Information Base for the UDP using SMIv2
RFC 1659 RS-232-MIB Definitions of Managed Objects for RS-232-like Hardware Devices
RFC 2863 IF-MIB The Interface Group MIB
RFC 2819 RMON-MIB Remote Network Monitoring (RMON) management Information base
RFC 4188 BRIDGE-MIB Definitions of Managed Objects for Bridges

Siemens RUGGEDCOM ROS v4.3 Specifications

General

Brand	Siemens
Model	RUGGEDCOM ROS v4.3
Category	Wireless Router
Language	English