Siemens RUGGEDCOM ROS v4.3 - Page 148

Chapter 4
System Administration
RUGGEDCOM ROS
User Guide
132 Configuring User Privileges
To configure the privilege levels for each user type, do the following:
1. Navigate to Administration» Configure Security Server» Configure TacPlus Server» Configure TACPLUS
Serv Privilege Config . The TACPLUS Serv Privilege Config form appears.
54
3
2
1
Figure76:TACPLUS Serv Privilege Config Form
1.Admin Priv Box 2.Oper Priv Box 3.Guest Priv Box 4.Apply Button 5.Reload Button
2. Configure the following parameter(s) as required:
Parameter Description
Admin Priv Synopsis:  (0 to 15)-(0 to 15)
Default:  15
Privilege level to be assigned to the user.
Oper Priv Synopsis:  (0 to 15)-(0 to 15)
Default:  2-14
Privilege level to be assigned to the user.
Guest Priv Synopsis:  (0 to 15)-(0 to 15)
Default:  1
Privilege level to be assigned to the user.
3. Click Apply.