Siemens RUGGEDCOM ROS v4.3 User Manual

Chapter 3
Device Management
RUGGEDCOM ROS
User Guide
52 Viewing Product Information
9
5
4
3
2
1
6
7
8
Figure8:Product Information Form (Example)
1.MAC Address Box 2.Order Code Box 3.Classification Box 4.Serial Number Box 5.Boot Version Box 6.Main Version Box
7.Required Boot Box 8.Hardware ID Box 9.Reload Button
This screen displays the following information:
Parameter Description
MAC Address Synopsis:  ##-##-##-##-##-## where ## ranges 0 to FF
Shows the unique MAC address of the device.
Order Code Synopsis:  Any 57 characters
Shows the order code of the device.
Classification Synopsis:  Any 15 characters
Provides system classification.
The value Controlled indicates the main firmware is a Controlled
release. The value Non-Controlled indicates the main firmware is a
Non-Controlled release. The Controlled main firmware can run on
Controlled units, but it can not run on Non-Controlled units. The
Non-Controlled main firmware can run on both Controlled and Non-
Controlled units.
Serial Number Synopsis:  Any 31 characters
Shows the serial number of the device.
Boot Version Synopsis:  Any 47 characters
Shows the version and the build date of the boot loader software.
Main Version Synopsis:  Any 47 characters
Shows the version and build date of the main operating system
software.
Required Boot Synopsis:  Any 15 characters
Shows the minimum boot software loader version required by
running main.
Hardware ID Synopsis:  { RSMCPU (40-00-0008 Rev B1), RSMCPU2 (40-00-0026
Rev A1), RS400 (40-00-0010 Rev B2), RMC30, RS900 (40-00-0025
Rev B1), RS900 (40-00-0032 Rev B1), RS1600M, RS400 (40-00-0010

Siemens RUGGEDCOM ROS v4.3 Specifications

General

Brand	Siemens
Model	RUGGEDCOM ROS v4.3
Category	Wireless Router
Language	English