Chapter 8 — Using the Cartridge Inventory Moving Cartridges Within a Partition
December 2019 User Guide—Spectra T200, T380, and T680 Libraries
257
6. If you are moving a cartridge to a slot, locate and select the desired slot
in the Destination list.
7. Click Add Move. An entry listing the move you just defined appears in
the Move Queue list.
8. Repeat Step 3 on page 255 through Step 7 on this page for each
additional cartridge you want to move.
Note: If you want to remove one or more of the moves in the queue:
Select the move and click Delete to remove it from the Move
Queue list.
Click Delete All to remove all of the defined moves from the
Move Queue list.
Cleaning Cleaning—Lists all of the empty slots in the selected cleaning partition.
To TAP—Configures a move that transfers the maintenance magazine
containing the source slot to the TAP so that you can remove or replace the
cleaning cartridge from the specified slot. The magazine is then returned to its
original location.
All—List all available destinations in the partition, regardless of the type.
Note: Selecting a specific destination type instead of using All displays fewer
items through which you must scroll to locate the desired destination slot.
Partition Type Available Destinations
Figure 152 Add the move to the Move Queue.
Click Add Move to add the
defined move to the Move
Queue.
To Next Page
Loading...
