Chapter 12 — Library Troubleshooting Discovering and Setting the BlueScale Vision Camera IP Address
December 2019 User Guide—Spectra T200, T380, and T680 Libraries
370
6. Click Configuration to see the options for configuring the camera.
7. Select System > General settings. On the System General Settings
screen, enter the following information:
If desired, change the Host name for the camera so that you can
easily identify it. This name displays at the top of the screen.
Select to Keep current date and time, Synchronize with computer time,
set the time manually, or set the time automatically by entering the
IP address or domain name for an NTP server.
8. Click Save.
Figure 225 The viewing software home page.
Figure 226 Enter a Host name and set the date if necessary.
To Next Page
