Appendix C — Specifications Library Specifications
December 2019 User Guide—Spectra T200, T380, and T680 Libraries
536
International 200 – 240 VAC Power Cord The criteria for an international
200-volt to 240-volt AC power cord are as follows:
Supply-End Connector Types
The type of connector on the supply end of the cord depends on the
country. The following table shows the Spectra Logic part numbers for
power cords with the supply-end connector types used in each country.
Parameter Specification
Power cordage Flexible, HAR (harmonized) type H05VV?F, three
conductor, cord with minimum conductor size of
1.7 square millimeters (0.0026350 square inches).
Power input connectors Male: Connector must be of the proper type,
rating, and safety approval for the intended
country (see Supply-End Connector Types for
available power cord connectors).
Female: IEC 60320 C13
Part
Number
Country of Use Plug Style Appearance
8147
a
North America NEMA 5-15P
8297 North America IEC-60320 C14
5500 North America,
Korea
NEMA L6-20P
7029 North America,
Korea
NEMA L6-30P
6805
a
United Kingdom BS 1363A
To Next Page
Loading...
