12713020-002-2 Revision D – April 2004 SSU-2000 User’s Guide 339
Interactive Command Set
FREQUENCY
Use this command to display the input frequency data from a selected input port.
Level 0 Not applicable
Level 1
FREQUENCY [xAy][{A|B}]
Use this command to view the frequency measurement from a
selected input module. If you do not provide a parameter,
frequency measurement on the selected clock to all inputs
displays.
Options are:
A|B Clock A or Clock B
Level 2 Same as Level 1 operation
Level 3 Same as Level 1 operation
Level 4 Same as Level 1 operation
Remarks None
Related INPUT, PHASE
Restrictions None
Example:
SSU_2000->FREQUENCY
1A04-01 FreqA:2001-06-18T20:54:19, 0
1A04-02 FreqA:2001-06-18T20:54:19, 1
1A04-03 FreqA:2001-06-18T20:54:19, 1
1A09-01 FreqA:2001-06-18T20:54:19, 3
1A09-02 FreqA:2001-06-18T20:54:19, 2
1A09-03 FreqA:2001-06-18T20:54:19, 1
To Next Page
Loading...
Need help?
General
