12713020-002-2 Revision D – April 2004 SSU-2000 User’s Guide 361
Interactive Command Set
PING
Use this command to view network ping (diagnostic) capabilities.
Level 0 Not applicable
Level 1 Not applicable
Level 2
PING ip_dotted_address
Use this command to determine if the unit is connected to the
network. This command transmits a packet to the specified
address and waits for a response. If a response is received, the
unit displays a successful command completion message. If no
response is received, the unit times-out and prints an unsuccessful
command completion message.
Level 3 Same as Level 2 operation
Level 4 Same as Level 2 operation
Remarks No name server is available. The Internet Protocol (IP) address is
formatted as a decimal dotted address.
Related None
Restrictions None
To Next Page
Loading...
Need help?
General
