Sysmex XP-300 2-3
Safety Information
Revised February 2013
2.4 Avoiding infections
• In principle, all parts and surfaces of this instrument
must be regarded as potentially infectious, since this
instrument analyzes patient specimens.
• The use of protective garments and gloves when
operating, maintaining, or servicing the unit is
strongly recommended. Use only specified tools and
parts. After work is completed, wash hands with
disinfectant.
• Never touch waste, or parts having been in contact
with waste, with your bare hands.
• Should you inadvertently come in contact with
potentially infectious materials or surfaces,
immediately rinse skin thoroughly with water, and
follow your hospital or laboratory’s prescribed
cleaning and decontamination procedures.
• Control blood must be regarded as potentially
infectious. Wear protective garments and gloves
when performing quality control.
To Next Page
Loading...
