SYSMEX XP Series - Printing Calibration History

10-12 Sysmex XP-300
Calibration
January 2012
10.6 Printing calibration history
An overview of 5 most recent calibration histories can be printed out
on the internal printer.
(1) Press the [Menu] button at the Ready status.
The Menu screen will appear.
(2) Press the [Calib.] button.
The calibrating menu screen will appear.
(3) Press the [Print Cal. His.] button.
The internal printer will print the calibration history.
Note:
If a password has been set, the password input screen will
appear. Enter the password.