Sysmex XP-300 13-3
Troubleshooting
January 2012
13.2 Error messages
General
When an error occurs, a beep alarm sounds, the button flashes,
and an error dialog appears on the LCD screen.
• Press the [OK] button to stop the alarm beep and close the error
dialog screen.
• Press the button to display the steps for rectifying the error
on the LCD screen.
• If multiple errors occur simultaneously, they are displayed
ranked by importance.
• Press the [Detail] button.
The help screen of the error at the top of the list will be
displayed.
• Follow the instructions.
• Press the [Detail] button to go to the next screen.
• Press the [Back] button to close the screen.
• If the error persists, contact your Sysmex service representative.
To Next Page
Loading...
