SYSMEX XP Series - Prepare Internal Printer Paper (Printing Paper No. 3)

Sysmex XP-300 5-11
Initial Operation
Revised April 2012
5.6 Prepare internal printer paper (Printing Paper No. 3)
(1) Open the front cover of the main unit.
(2) Push down the lock lever.
Lock is released and the printer cover is pulled open toward the
front.
(3) Mount the new printer paper.
(4) Pass the printer paper through along the paper guides.
(5) Push the printer cover back in position until it locks.
Press the button (paper feed button) to confirm that the
printer paper is fed correctly.
Lock lever
Printer cover
New printer paper
(Printing Paper
No. 3)
Paper
guide
Printer head
Information
• Be sure to set the printer paper straight in the right
direction. If the printer paper is crooked, the paper
may jam.
• Make sure the printer cover is securely closed.
If the cover is not securely closed, a printing error or
incorrect output may result.
Caution, Hot!
The printer head becomes hot. Use caution.
Caution!
Static electricity may damage the printer head. Do not
touch with hands.