Sysmex XP-300 1-1
Introduction
January 2012
1. Introduction
Thank you for purchasing the Sysmex XP-300 Automated
Hematology Analyzer.
Before operating this instrument, carefully read this manual.
Keep this manual for further reference.
The XP-300 is a compact instrument, which is designed for easy
operation. For each operating step, the user can adapt the instrument
to his/her needs or existing laboratory conditions by selecting the
appropriate settings. The instrument can also be connected to a host
computer etc., and can be used as one instrument in an analytical
system.
Analysis is possible in whole blood mode as well as in pre-diluted
mode. For this reason, the XP-300 can also be used with a minute
amount of blood (Minimum required volume: 20 μL when analyzing
in pre-diluted mode).
The XP-300 performs a reliable analysis of 20 parameters and
displays analysis results in 3 histograms on the LCD screen. In
addition, the analysis data can be printed on the internal/external
printer.
• Data generated by the XP-300 is not intended to replace
professional judgment in the determination of a diagnosis
or in monitoring patient therapy.
• Operate the instrument as instructed. Reliability of test
results cannot be guaranteed if there are any deviations
from the instructions in this manual. If the instrument fails
to function properly as a result of either the user’s operation
not specified in the manual or the user’s utilization of a
program not specified by Sysmex, the product warranty
would not apply.
To Next Page
Loading...
