12-38 Sysmex XP-300
Cleaning and Maintenance
Revised June 2013
12.19 List of consumables
Reagents list
Consumable list
It is recommended to always keep a sufficient amount of
the following supplies and consumables available. This will
assure that your instrument is available for use.
Product name Volume General name
PK-30L 20 L Diluent (CELLPACK)
CPK-310A 10 L Diluent (CELLPACK)
SWH-200A 500 mL × 3 WBC/HGB lyse (STROMATOLYSER-WH)
CL-50 50 mL Detergent (CELLCLEAN)
A 20 L or 10 L Cubitainer spout kit is required when you use CELLPACK.
For details, contact your Sysmex service representative.
943-1781-1 Cubitainer Spout Kit No. 1 (for 20 L)
943-1782-4 Cubitainer Spout Kit No. 1 (for 10 L)
Part No. Product name Chapter & Section for reference
933-3601-9 Transducer Brush No.1 “12.12 Clean aperture of TD chamber
(drain TD chamber)”
AV258119 Printing Paper NO.3/5P “12.18 Replace internal printer paper
(Printing Paper No. 3)”
266-5011-3 Fuse 250V 4A ST4-4A-N1 “12.17 Replace system fuses”
AX880901 Fuse 250V 3.15A 50T032H
To Next Page
Loading...
