SYSMEX XP Series - Possible Settings

Sysmex XP-300 11-3
Instrument Setup
Revised June 2013
11.2 Possible settings
System
Make the basic settings for the instrument.
Note:
The underlined items are the initial settings made before
shipment from the factory.
Parameter Setting
[Units] [Type 1]/[Type 2
]/[Type 3]/[Type 4]/[Type 5]/
[Type 6]
[Type 1]: Japan
[Type 2]: General Export
[Type 3]: Canada SI
[Type 4]: Dutch SI
[Type 5]: Standard SI
[Type 6]: Hong Kong SI
Setting changes made for this parameter become
valid the next time the main power switch is
turned ON. For details, see “14. Technical
Information”.
[Language] [Japanese]/[English
]/[French]/[German]/
[Spanish]/[Italian]/[Chinese]/[Russian]/
[Portuguese]/[Indonesian]/[Korean]/
[PT-BR]
*1
Setting changes made for this parameter become
valid the next time the main power switch is
turned ON.
*1: Brazilian Portuguese
[Par.Name] [W-SCR]/[LYM%
]
Setting changes made for this parameter become
valid the next time the main power switch is
turned ON.
[Volume] [1]/[2]/[3
]
[1]: Quiet
[2]: Medium
[3]: Loud
[Alarm] [Type 1
]/[Type 2]/[Type 3]/[Type 4]/[Type 5]/
[Type 6]
[Type 1]: High continuous beep
[Type 2]: Repeated high beeps
[Type 3]: Repeated high 2-tone beeps
[Type 4]: Low continuous beep
[Type 5]: Repeated low beeps
[Type 6]: Repeated low two-tone beeps