6-8 Sysmex XP-300
Operation
Revised July 2012
SNCS service contract
You need to sign up the SNCS service contract to use the SNCS
service. For details about the SNCS service contract, contact your
local Sysmex service representative.
Online QC
When you perform a quality control analysis, the analysis result is
automatically transmitted to the SNCS server together with the QC
file and instrument information.
Maintenance report
(1) Start up report
When the start up of the instrument is complete, the information
that is automatically transmitted to the SNCS server includes:
• Analysis data for background check during start up
(2) Shutdown report
When the shutdown is performed or shutdown has not been
performed for 24 hours after the power is turned on, the
information that is automatically transmitted to the SNCS
server includes:
• Program version
• Cycle counts
• Reagent replacement log and calibration log
(3) Maintenance log
When maintenance is carried out, the maintenance log is
automatically transmitted to the SNCS server.
Error report
When an error occurred or when an error was recovered, the
information about the error that occured is automatically transmitted
to the SNCS server includes:
• Date/time when the error occurred
• Error name/code
To Next Page
Loading...
