Display setups Select the graticule style
Select the graticule style
From the Display menu, select Objects, or open the Objects tab in the Display control window.
To use
Click one of the buttons to select the graticule (display grid) style.
Behavior
Full provides a grid, cross hairs, and frame on the instrument display. Use Full to make quick
estimates of waveform parameters.
Cross Hair shows cross hairs and a frame on the instrument display. This style is useful for making
quick estimates of waveforms while leaving more room on the display for automatic readouts and
other data.
Grid shows a frame and a grid on the instrument display. This style is useful for making quick,
full-screen measurements with cursors and au tomatic readouts when cross hairs are not needed.
Frame shows only a frame on the instrument display. This style is useful with automatic readouts
and other screen text when other display features are not needed.
Use IRE if you are working with NTSC video signals. The instrument sets the graticule to
accommodate the vertical position and scale of the signal.
Use mV if y ou are working with video signals other than NTSC. The instrument sets the graticule to
accommodate the vertical position and scale of the signal.
TIP. Use the Display menu Graticule Style submenu to directly access the graticule style options.
What do you want to do next?
Learn about changing the overall display appearance. (see page 163)
174 DSA/DPO70000D, MSO/DPO/DSA70000C, DPO7000C, and MSO/DPO5000 Series
To Next Page
Loading...
Need help?
General
