How to ? Delete instrument setups
Delete instrument setups
Use this procedure to delete all instrument setups previously saved to the oscilloscope memory.
1. From the File menu, highlight Delete; then select All Setups from the submenu.
2. In the resulting Delete all setups? dialog box, click Yes.
Use the following procedure to delete an instrument setup previously saved to a Windows directory.
1. From the Fil
e menu, select Recall.
2. In the Recall dialog box, click Setup.
3. Navigate to the directory where the setup was saved
4. Select the setup.
5. Click the
next to the directory.
DSA/DPO70000D, MSO/DPO/DSA70000C, DPO7000C, and MSO/DPO5000 Series 669
To Next Page
Loading...
Need help?
General
