Tektronix DPO5000 Series User Manual

Oscilloscope Reference Cycle area
Cycle area
The cycle area is a voltage over time measurement. The measurement is the area over the first cycle in the
waveform or the first cycle in the gated region expressed in volt-seconds. The area above the common
reference po
int is positive while the area below the common reference point is negative.
Cycle mean
This voltage measurement is the arithmetic mean over the first cycle in the waveform or the fi rst cycle in
the gated r
egion.
Cycle RMS
This voltage measurement is the true Root Mean Square voltage over the first cycle in the waveform
or the fir
st cycle in the gated region.
Data direction
In the Data Direction drop-down list, specify the data direction.
Data threshold
1. Click in the Data Threshold entry box.
2. Use a multipurpose knob to set the threshold voltage for the trigger.
802 DSA/DPO70000D, MSO/DPO/DSA70000C, DPO7000C, and MSO/DPO5000 Series

Tektronix DPO5000 Series Specifications

General

Brand	Tektronix
Model	DPO5000 Series
Category	Test Equipment
Language	English