www.trilithic.com
Page II-48
180 DSP Operation Manual
Signal Level Meter
Channel Standard
The Channel Standard setting is
used to select the analog encoding
standard. Use the up/down arrow
buttons to select from the following
standards:
• NTSC
• PAL B/I/D/N/M/G/H/K
• SECAM B/L/D/G/H/I/K
Analog Channel Properties
When the Channel Type is set to Analog,
the following settings are available. From
within the Edit Channel screen, use the
left/right arrow buttons on the keypad to
navigate through the list of setup items.
To Next Page
Loading...
