www.trilithic.com
Page II-49
180 DSP Operation Manual
Signal Level Meter
Center Frequency
The Center Frequency setting is used
to adjust the center frequency of the
channel. The center frequency can be
set from a minimum of 50.000 MHz up
to a maximum of 999.999 MHz.
Use either of the following methods
to change the center frequency of the
channel:
• Use the up/down arrow buttons
to change the value in 0.050
MHz increments.
• Press the Enter button and use
the Virtual Keyboard to directly
enter the center frequency as
shown in the image to the right.
To Next Page
Loading...
