Trilithic 180 DSP User Manual

www.trilithic.com
Page II-94
180 DSP Operation Manual
Signal Level Meter
Export All Files
Perform the following steps to export all les to a USB ash drive:
1. Insert a USB ash drive into the USB
port of the 180 DSP.
2. Press the Function button and select
the Activate USB Power function as
shown in the image to the right.
3. The power to the USB ash drive
is activated and the drive is now
mounted to the le system as shown in
the image to the right. The 180 DSP is
now capable of transferring les to and
from the USB ash drive.
4. Select the File softkey.
5. From the File pop-up menu, select
the Export All button as shown in the
image to the right.

Trilithic 180 DSP Specifications

General

Brand	Trilithic
Model	180 DSP
Category	Measuring Instruments
Language	English