Trilithic 180 DSP - Go to Scan

www.trilithic.com
Page IV-41
180 DSP Operation Manual
Signal Level Meter
Go to Scan
The Go to Scan feature provides the ability to go to the Channel Plan Scan display
directly from the Level measurement screen.
Select the Goto Scan button from the
Display pop-up menu to display the
Channel Plan Scan screen.
The Channel Plan Scan screen
allows you to perform a scan of all of
the channels in the current channel
plan.
For more information on Channel Plan Scan, see Chapter 3:
Channel Plan Scan, later in this section.