Trilithic 180 DSP User Manual

www.trilithic.com
Page II-26
180 DSP Operation Manual
Signal Level Meter
Sleep Mode Delay
The Sleep Mode Delay setting is used to
conserve power by automatically enabling
the sleep mode after the 180 DSP has
been idle for a specied period of time.
The default setting for the sleep mode
delay is 5 Minutes. The sleep mode delay
can be set from a minimum of one (1)
minute up to a maximum of 60 minutes.
Use either of the following methods to
change the sleep mode delay:
• Use the up/down arrow buttons to
change the value in one (1) minute
increments.
• Press the Enter button and use the
Virtual Keyboard to directly enter
the sleep mode delay as shown in
the image to the right.
Quickly Press the Power button to
awaken the 180 DSP from sleep
mode. The sleep mode delay timer will
automatically restart.
Whenever the 180 DSP is being powered by the AC to DC
power adapter & battery charger, the sleep mode delay will be
deactivated automatically.

Trilithic 180 DSP Specifications

General

Brand	Trilithic
Model	180 DSP
Category	Measuring Instruments
Language	English