www.trilithic.com
Page II-96
180 DSP Operation Manual
Signal Level Meter
Delete Files
Perform the following steps to delete îš¿les from the internal memory of the 180 DSP:
1. Use the arrow buttons to highlight the
îš¿le that you want to delete.
2. Select the File softkey.
3. From the File pop-up menu, select the
Delete button as shown in the image
to the right.
4. The Continue window will be
displayed as shown in the image to
the right.
5. Select the OK button to delete the
îš¿le or select the Cancel button to exit
without deleting the îš¿le.
To delete multiple îš¿les at the same time, see the Select
Multiple Files section earlier in this chapter.
To Next Page
Loading...
Need help?
General
