Trilithic 180 DSP - Select Multiple Files; Export Multiple Files

www.trilithic.com
Page II-91
180 DSP Operation Manual
Signal Level Meter
Select Multiple Files
Perform the following steps to select multiple les to export or delete:
Export Multiple Files
1. Insert a USB ash drive into the
USB port of the 180 DSP.
2. Press the Function button and
select the Activate USB Power
function as shown in the image to
the right.
3. The power to the USB ash drive
is activated and the drive is now
mounted to the le system as
shown in the image to the right.
The 180 DSP is now capable of
transferring les to and from the
USB ash drive.
4. Select the File softkey.
5. From the File pop-up menu,
select the Select Multiple button
as shown in the image to the right.