www.trilithic.com
Page II-65
180 DSP Operation Manual
Signal Level Meter
• Hum Fundamental – This sets the
maximum Hum fundamental rate.
• Hum 2nd Harmonic – This sets
the maximum Hum 2nd harmonic
fundamental rate.
• Hum Low-Band – This sets the
maximum Hum low-band rate.
• DOCSIS 3.1 PLC Post-Bit
Error – This sets the maximum
DOCSIS 3.1 PLC post-bit error rate.
• DOCSIS 3.1 PLC Pre-Bit Error – This sets the maximum DOCSIS 3.1 PLC pre-bit
error rate.
• DOCSIS 3.1 PLC Level – This sets the minimum and maximum DOCSIS 3.1 PLC
level.
• DOCSIS 3.1 Peak to Valley – This sets the maximum DOCSIS 3.1 peak to valley
level.
• DOCSIS 3.1 MER – This sets the minimum DOCSIS 3.1 MER.
• DOCSIS 3.1 Adjacent Level – This sets the maximum DOCSIS 3.1 adjacent level.
To Next Page
Loading...
