www.trilithic.com
Page II-88
180 DSP Operation Manual
Signal Level Meter
9. The Message Bar will indicate a
successful import from the ash drive
by displaying the text “Imported /
media/sda1/<le_name>” as shown
in the image to the right.
6. From the ViewPoint Files window,
use the arrow buttons to highlight the
le you would like to import.
7. A conrmation window will be
displayed as shown in the image to the
right. If you have existing ViewPoint
les on the meter, it will ask if you want
to replace them.
8. Select the Yes button to import the le
and replace existing les or select No
to keep the existing package les and
import the new package.
To Next Page
Loading...
