Wittenborg FB 5100 - Dismounting the Boil over Sensor

13
Dismounting the boil over sensor
Procedure Follow this procedure to dismount the boil over sensor:
Step Action Illustration
1.
Open the cabinet door, turn off the machine (main switch), pull out the
power supply plug and close the water cock.
2.
Dismount the brewer.
3.
Remove the protective cover in front of the freshbrew/instant water
tank.
Warning: Hot water, there is a risk of being scalded. Wait till the
water has cooled down.
4.
Disconnect the electrical connection.
5.
Unscrew the boil over sensor
(1).
1