13
Rinse message
setting facility
After a certain preset dispensing interval, the machine will indicate that it
needs cleaning. The rinse message setting facility can make the machine
react in various ways:
In this option, it is defined how the machine must react on a rinse request,
as well as the required intervals.
8.
Press: Accesses the next function "Rinse
Message Setting"
Step Action Function
Options Description
Function off This option will be inactive and the correspond-
ing menus in "Operator setting menus" will not
be displayed.
Display only The display will show a rinse request when the
number of drink dispensings exceeds the num-
ber set in "rinse interval". The machine will still
be able to vend drinks.
When the cleaning has been carried out, the
interval must be reset, see Operator setting
menus, "Rinse".
Stop vending The machine will stop any vending from the
machine when the number of drink dispensings
exceeds the number set in "rinse interval".
When the cleaning has been carried out, the
interval must be reset, see Operator setting
menus, "Rinse".
To Next Page
Loading...
