6
Service Menu Options
The service menu is used for data retrieval and setting options necessary
for a trained service technician.
Service options • Accessing and operating the Service options
• Enter password
• Change password
• Product counter
• Reset counter
• System setting options
• Canister setting
• Rinse message setting
• Calibrating valves
• Calibrating a valve
• Calibrating ingredients
• Temperature calibration
• Operator setting
• Quantities option
• Boiler setting option
• Setting cup sensor
• Setting payment
• Vend/change mode option
• Max. change setting
• Max credit setting
• Obligation to buy setting
• Revaluating option
• Coin inhibit setting
• Low change inhibit setting
• Exact change equation setting
• Exact change offset setting
• Keypad inhibit setting
The Service Setting menu system is shown on the following page.
The service options may only be accessed by entering a password.
Accessing the various menu options are shown in succession from the
starting point "password", i.e. you cannot access an option directly, you
have to start from "password" and by means of the preselection buttons to
guide yourself down the system considering the texts in the display.
To Next Page
Loading...
