31
Dismounting the pressure water tank
Warnings • Before any repair is carried out, the main plug must be withdrawn from
the main supply!
• Only carry out this repair when the machine has cooled down!
Procedure Follow these steps to dismount the pressure water tank:
Step Action Illustration
1.
Remove waste bucket, coffee bean canister and espresso brewer.
2.
Dismount water system.
3.
Remove hoses from pump
(1).
• Press hose downwards
with one hand, then
press ring downwards
with the other hand and
hold it there, while pull-
ing hose upwards.
4.
Disconnect cable connec-
tions to valves (2).
5.
Remove three screws (3).
6.
Unscrew fitting (1) from
valve for espresso drinks.
7.
Unscrew fitting from over-
pressure valve (2).
8.
Unscrew three fittings (3).
1
2
3
2
1
3
To Next Page
Loading...
