9
Cleaning the coffee grinder
Introduction The grinder is normally self cleaning. It is sufficient to occasionally use a
soft brush to remove build ups and residues from the canister.
Tiny stones occasionally get mixed up with even the finest blends of coffee
beans. To prevent them damaging the blades, the machine has an integral
electronic stone detection function which cuts out the motor to prevent
damage to the grinder.
Warning Never pour water into the coffee grinder as this would damage the grinding
discs.
Procedure Follow these steps to clear the blockage:
Step Action Illustration
1.
Turn off the machine (main switch).
2.
Remove the coffee beans canister:
• Press in the canister shutter to closed position to prevent coffee beans
from falling out of the canister.
• Remove canister by releasing it from the bracket at the rear of the can-
ister and from the hook at the bottom of the canister.
3.
Remove the remaining beans from the grinder.
4.
Using the special multifunctional
tool, grasp the square end of the
grinding discs spindle and slow-
ly turn the discs in a clockwise
direction until the stone or for-
eign body is released and can
be removed.
Note: It is a good idea to use a
vacuum cleaner for removing
foreign bodies.
To Next Page
Loading...
