Wittenborg FB 5100 - Replacing the Grinder Motor

5
Replacing the grinder motor
Warnings • Before any repair is carried out, the main plug must be withdrawn from
the main supply!
• Only carry out this repair when the machine has cooled down!
Procedure Follow the procedure below to replace the grinder motor:
Step Action Illustration
1.
Remove waste bucket, coffee bean canister, espresso brewer, water
system cover and coffee grinder.
2.
Disconnect electrical
connection (1).
3.
Remove three screws (2)
to dismount grinder motor
(3).
4.
Install new grinder motor and reassemble in reverse order.
1
2
3