7
Setting the coffee grinder (coarse/fine grind)
Introduction The ES model is equipped with a coffee grinder which grinds the amount
of coffee required immediately before the beverage is prepared and dis-
pensed.
The grinder can be set in the range from coarse to fine grinding.
Note Always adjust the setting of the grinder when the type of coffee is changed
and to allow for general wear of the blades.
The blades of the grinder must always be sharp; blunt blades tend to crush
the beans and produce excessive dust.
Grinder setting
Default The factory default setting is 3 or 4, i.e. medium fineness.
Adjusting the
grinder
The procedure for adjusting the coffee grinder is as follows:
Grinder setting
Grinder setting 1 fine
Grinder setting 6 coarse
Step Action
1.
Use the special multifunctional tool to adjust the fineness setting to the
required position.
NB. The pointer on the grinder shows the current setting.
2.
Adjust the grinder setting
as follows
Turn the knob
Fine clockwise
Coarse anti-clockwise
To Next Page
Loading...
