Marts 2000 SM5100001100.doc
Service Message
Dear Colleagues
I hereby send you Service Message
regarding model 5100 change of fan.
If you have any comments please do not
hesitate to contact either me or the
reference persons listed.
Production Start: week 11-2000
First Machine No. 481.538
Best Regards
Wittenborg A/S
Jan Sørensen
Product Line Manager
CONTENTS
PAGE
New Fan 1-2
New FAN
We have introduced a new fan in the
ingredient table.
·
Faster changing of fan servicetime
decreased with 75 %
·
Noise level is 25 % lower
·
Airflow increased with 25 CFM
Today the fan is mounted horisontal
under the ingredient table. The new fan
is mounted vertical on the back of the
ingredient table.
To change the new fan is simple – tilt
the ingredient table foreward and pull
out the fan from behind the ingredient
table.
The fan is mounted to a sheetmetal
plate with 2 screws, the sheet metal
plate fits in 2 recesses and 2 holes on
the back of the ingredient table.
Backwards Compatible:
No
Old fan can still be ordered as sparepart
42.2032.00
To Next Page
Loading...
