USER GUIDE (SCAN)
3–21
U
SER
G
UIDE
(S
CAN
)
4
Select the pages that you want scanned; Both Pages, Left Page or
Right Page only.
5
Enter the value for the Center Erase, if necessary.
• Center Erase is used to delete the center shadow from the
output. Use the arrows to adjust the amount of erase.
Center Erase values range from 0 to 50 mm.
6
Place the open document face down with the upper outside corner
of the right page in the upper left corner of the document glass.
• Confirm that the Original Document matches the Original
diagram on the screen.
7
Press Start to begin scanning, or press Save to select additional
scanning functions.
To Next Page
Loading...
