3–2
U
SER
G
UIDE
(S
CAN
)
How to Scan using the Mailbox
You can scan originals, and then store the scanned document in
mailboxes. The scanned document can be saved in JPEG or
TIFF format.
NOTE: In order to use this machine as a scanner, the IP address,
Port, and mailboxes must be properly configured. Setting
information can be found in the System Administration Guide.
1
Place the document in the DADF or on the glass.
2
Select Scan from the Menu screen.
• The Basic Scanning screen will be displayed.
3
Select Mailbox from the Basic Scanning screen.
• The Mailbox screen will be displayed.
4
Select the mailbox where the scanned data is to be stored.
I
You can go to the previous screen by touching the up arrow, and
the next screen by touching the down arrow. Or using the
numeric keypad you can enter numbers in the Display Start
Number box to go directly to a specific Mailbox.
To Next Page
Loading...
Need help?
General
