3–30
U
SER
G
UIDE
(S
CAN
)
Installing the Network Scanner Utility
Network Scanner Utility allows you to access stored data in the
mailbox from a client. This section describes the installation and
uninstallation of the Network Scanner Utility using the Driver/
Network Utility CD.
Required Environment
To install Network Scanner Utility, a client must meet the following
requirements:
Target Operating System • Microsoft Windows 95/98/ME
• Microsoft Windows NT version 4.0/2000/XP
NOTE: Windows NT Server TSE (Terminal Server Edition) and
Windows 2000 Server/Advanced Server Terminal Service are not
compatible with this feature.
Client Workstation • i486DX4/100 MHz processor or above (Pentium 100 MHz or
above is recommended.
• 32 MB memory.
• 40 MB or more of free hard disk space (not including space for
scanned data).
Network A client must be connected to a network and be able to
communicate with the TCP/IP protocol.
Target Application
Software
To import the data stored in the mailbox to application software,
the software must be compatible with the TWAIN interface.
To Next Page
Loading...
Need help?
General
