USER GUIDE (MACHINE
ADMINISTRATOR)
4–45
U
SER
G
UIDE
(M
ACHINE
A
DMINISTRATOR
)
Setting Scan Defaults
This sets the defaults for scanner features. The machine returns
to the defaults set here when the power is turned on, the machine
returns from the Power Saver mode, or the Clear All button is
pressed. Setting frequently used features prevents you from
having to change settings each time you scan. The following items
can be configured in Scan Features Defaults.
Output Color Set the default for Output Color on the Basic Scanning screen.
Select from Full Color, Grayscale (256 tones), Auto, and Black.
The default is Auto.
Scan Resolution Set the default for Scan Resolution on the Basic Scanning screen.
Enter the setting using the number buttons listed in the following
table. The default is 0, 200 dpi.
NOTE: If this is set at 3, 600 dpi, and Output Color is set at Full
Color, scanning requires 256 MB memory.
Mixed Size Originals Set the default for Mixed Size Originals on the Scan Options
screen in Scan mode. Set whether or not to use the mixed size
originals feature when the DADF is used for scanning.
Enter the setting using the number buttons listed in the following
table. The default is 0, Off.
Setting Description
0
200 dpi
1
300 dpi
2
400 dpi
3
600 dpi
Setting Description
0
Off
1
On
To Next Page
Loading...
Need help?
General
