Xerox DocuColor 2240

1–70
U
SER
G
UIDE
(C
OPIER
)
Job Assembly Tab
Below is a brief description of each feature available on the Job
Assembly tab. Each feature is explained in detail on the following
pages.
Stored Jobs Allows you to program various feature settings in the built-in
copier memory as a single job.
Build Job Allows you to build a job using different settings for each page or
segment of a job.
Booklet Creation Automatically copies your originals such that the output set can be
folded into a booklet.
Stored Jobs
The Stored Jobs feature allows you to program various feature
settings in the built-in copier memory as a single job. Up to 8 jobs
can be stored and up to 18 characters can be entered for each job
name. This feature is especially helpful for complex jobs that you
run frequently.
You can retrieve stored jobs and apply their programming features
to a new copy job. Deleting stored jobs frees that memory
position for storing different jobs.