4–16
U
SER
G
UIDE
(M
ACHINE
A
DMINISTRATOR
)
Tray 5 (Bypass) Paper Size
Defaults
Paper sizes can be assigned to tray 5 standard size buttons 1 to
11. 11 sizes can be registered to these buttons.
• A/B Series Size -A3, A4 SEF, A4 LEF, A5 SEF, A5 LEF, A6,
B4, B5 SEF, B5 LEF, B6
• Inch Size - 12 x 8", 11 x 17", 11 x 15", 8.5 x 14", 8.5 x 13", 8.5
x 11" SEF, 8.5 x 11" LEF, 5.5 x 8.5" SEF, 5.5 x 8.5" LEF
• Others - 8K, 16K, 6K
• Variable - Set the X (horizontal) range between 140 and
482mm, and the Y (vertical) range between 100 and 305mm in
1mm increments
Setting Printing Priority
Select which job will be prioritized when the machine receives a
copy job and printer job at the same time. If both are set at the
same priority, jobs are processed in order they are received.
Depending on the condition of the machine, they may not be
processed according to this setting.
Copy Job Sets the priority that will be given to copy jobs.
Enter the setting using the number buttons listed in the following
table. The default is 38, 3rd Priority.
Printer Job Sets the priority that will be given to print jobs.
Enter the setting using the number buttons listed in the following
table. The default is 48, No Priority.
Setting Description
18
1st priority
28
2nd priority
38
3rd priority
48
No priority
To Next Page
Loading...
Need help?
General
