2–48
U
SER
G
UIDE
(P
RINT
)
Output Setting Tab Settings
This section describes the settings in the Output Settings tab.
1
Select the printer icon in the Printers window, then click Printing
Preferences from the file menu.
2
Select the Output Settings tab.
3
Change the settings that you want to set.
4
When all setting changes are completed, select OK.
Job Type
Job Type You can specify the print function from among Secure Print,
Sample Print, and Delayed Print.
Secure Print: A function that temporarily stores print jobs in the
printer, and prints the job when instructed from the printer control
panel.
Sample Print: A function that outputs only 1 set when multiple
sets are specified. If the job is as specified, the remaining sets are
printed.
Delayed Print: A function that temporarily stores print jobs in the
printer, and prints them at a scheduled time.
• If you want to output secure prints, set the User ID and
password for Print Type in the Configuration tab.
Normal Print Select when you do not
want to output secure prints, sample
prints, or delayed prints.
Secure Print Select when you want to output secure prints.
Sample Print Select when you want to output sample prints.
NOTE: The Collated setting must be selected in the Page Setup
tab when using Print Type.
To Next Page
Loading...
Need help?
General
