USER GUIDE
(TROUBLESHOOTING)
5–5
U
SER
G
UIDE
(T
ROUBLESHOOTING
)
Paper Jams in Trays 1 to 4
This section describes how to clear paper jams that occur in Trays
1 to 4.
1
Open the tray where the paper jam occurred.
NOTE: Paper is sometimes torn and remains inside the machine if
you open a tray without checking the paper jam position. This may
cause machine malfunction. Check where the paper jam occurred
before clearing the problem.
2
Remove the jammed paper.
3
Push the tray in gently until it comes to a stop.
Paper Jams in Tray 5 (Bypass)
This section describes how to clear paper jams that occur in Tray
5 (Bypass).
1
Inspect the paper feed entrance of Tray 5 (Bypass), and remove
any jammed paper.
NOTE: When two or more sheets of paper are loaded, remove all
of the sheets from the tray.
NOTE: If paper is torn, check for any torn pieces of paper inside
the machine.
2
Fan the paper you removed making sure that all four corners are
neatly aligned.
3
Insert the paper into the Tray with the printing side facing down
until its lead edge lightly touches the paper feed entrance.
To Next Page
Loading...
Need help?
General
