4–62
U
SER
G
UIDE
(M
ACHINE
A
DMINISTRATOR
)
Setting the Totals Management Feature
You can set whether or not to enable the totals management
feature. When the totals management feature is activated, the
password entry screen is displayed when the power is turned On.
In the password entry screen, enter the password of the
appropriate user account to start using this machine.
1
Select Auditron Mode on the Auditron Administration screen. The
Auditron Mode screen is displayed.
2
Select On, and select Save. The screen returns to the Auditron
Administration screen. The machine may restart.
When Scan, ScanToEmail features are installed, the items that are
displayed vary according to the type of installed service. When On
is selected in ScanToEmail, the password must be entered to use
the ScanToEmail feature.
3
Select Close until the System Settings screen is displayed.
To Next Page
Loading...
Need help?
General
