3–14
U
SER
G
UIDE
(S
CAN
)
Scan Options Features Tab Overview
Below is a brief explanation of each feature available on the Scan
Options features tab. Each feature is explained in detail on the
following pages.
2 Sided Originals Use this setting to specify the original orientation when using the
DADF for scanning.
When the DADF is installed and used for scanning, the original
orientation must be set in order to specify the “Head” position of
the document.
Reduce/Enlarge The Reduce/Enlarge feature allows you to copy the image at
different magnifications. Copies may be reduced to 25% or
enlarged to 400%.
Scan Size Allows you to scan the original for automatic size detection or the
size may be input manually.
Bound Originals Allows you to scan the original for automatic size detection or the
size may be input manually.
Mixed Size Originals Automatically determines the correct copy paper size, based on
the original size and the selected reduction/enlargement.
Border Erase Allows you to erase unwanted edge markings from the original on
the scanned image. Select the type of border erase required.
To Next Page
Loading...
Need help?
General
