USER GUIDE (MACHINE
ADMINISTRATOR)
4–35
U
SER
G
UIDE
(M
ACHINE
A
DMINISTRATOR
)
Copy Control
This is for the setting regarding Copy Operation Control.
The following items can be set in Copy Operation Control.
Auto Paper Off Set which tray will be selected when Auto % or X-Y Auto Ratio is
selected in Reduce/Enlarge when Auto is selected in Paper
Supply, on the Basic Copying screen.
Enter the setting using the number buttons listed in the following
table. The default is 1, Select Tray 1.
Memory Full Procedure Set the processing method when the hard disk runs out of memory
during a job.
Enter the setting using the number buttons listed in the following
table. The default is 0, Disable.
Maximum Stored Pages This determines the maximum number of stored pages when
copying documents. It can be set from 1 to 999 pages.
Enter the number of the pages using the numeric keypad on the
Control Panel. The default is 999.
Setting Description
1
Select Tray 1
2
Select Tray 2
3
Select Tray 3
4
Select Tray 4
Setting Description
0
Disable (Discard stored
documents)
1
Enables stored data
To Next Page
Loading...
Need help?
General
